Currently Empty: $0,00
ATLAS: MULTICHANNEL DATALOGGER
Categories:
Digitizers Daqs, Monitoring
REQUEST FOR PRICING
ATLAS is a digital recorder designed for structural and seismic monitoring applications, whenever a robust and reliable “stand-alone” instrument is needed to continuously record data over a long period of time. The system is available with 3, 6 or 9 differential input channels for external sensors.
Description
EXCELLENT PERFORMANCE
The instrument is equipped with high-resolution delta-sigma 24bit ADCs, all the channels are synchronized and the sample rate is adjustable up to 1000 sps per channel. The internal memory (up to 1TByte) has two independent recording zones: the ring-buffer zone which is dedicated to continuous sampling, and the triggering zone which is used for event sampling.
The data format is MiniSEED.
The built-in GNSS receiver synchronizes the system clock with the absolute time so that a network of several units can be created where all the channels are synchronized. Using the trigger criteria that is available in the firmware, it is possible to distinguish environmental vibrations from seismic events.
EASY TO USE
You can control ATLAS locally via network connection (LAN or WiFi), and remotely using the integrated 4G modem (optional). The instrument can be used as a “stand-alone” unit to record seismic events in the field or it can be used in a MASTER-SLAVE based monitoring network where multiple instruments are connected to each other; the MASTER device manages the interconnection with the other SLAVE units, collecting data from them and managing the connection with the remote server. Furthermore, MASTER and SLAVE units can perform periodic analysis of ambient noise and post-seismic vibrations in order to evaluate the structural damage caused by an earthquake, in real-time.
Thanks to SeedLink protocol ATLAS is compatible with most popular seismic analysis software (Seiscomp3, Antelope, Earthworm).
INTEGRATED UPS
ATLAS is equipped with an internal battery (LiPo) which can guarantee an autonomy of about 33 hours in case of a blackout. This feature is greatly appreciated by our customers because it is like having an integrated UPS, and it saves space and money; both the 4G modem and external sensors’ power supply is backed up by the internal battery. ATLAS’ power supply ranges from 9 to 28 Volt DC, it can be connected to the electric power network with the power supply adapter included.
ROBUST
The anodized aluminum (INOX AISI316 option) enclosure is CNC milled, shockproof, vibration-resistant, weather-resistant and designed with a built-in mounting brackets for easy installation.
KEY FEATURES
| ATLAS |
|---|
| ADC resolution 24 bit |
| Sampling rates 1, 20, 25, 50, 100, 200, 250, 500 , 1000 sps synchronous |
| Dynamic range > 136dB@100 sps |
| Lan, Wi-fi and 4G modem |
| Built-in GNSS receiver |
| Integrated Ups, 33hrs system autonomy |
| Miniseed Data Format |
| Compatibility with Earthworm, Seiscomp, Geopsy, Seisgram2k |
Application
ATLAS is designed to suit various applications and provide a solution to the users needs in the field.
PERMANENT OR SHORT-TERM MONITORING
ATLAS can be used with an accelerometric or a velocimetric sensor.
ATLAS can be configured in-situ using WIFI or LAN cable.
If ATLAS is used for permanent monitoring, it can be reached remotely using the built-in HSPA modem or using LAN connection in order to link it, for example, to an ADSL modem.
LARGE STRUCTURE MONITORING
ATLAS is well suited to the monitoring of large structures where multiple sensor information is required.
In such applications sensors are wired up to ATLAS and with each device you can acquire up to 9 synchronous channels.
If more channels are needed, connection to an other ATLAS device and synchronization with the MASTER is possible. ATLAS can be reached locally via WiFi or remotely using the buit-in HSPA modem or by LAN.
STRUCTURAL MONITORING
ATLAS is often used in the filed of structural monitoring for calculating the specific resonant frequency of the buildings.
Lunitek has developed ad-hoc firmware based on FFT for real time evaluation of the building’s state of health.
STRUCTURAL MONITORING
STRUCTURAL MONITORINGMonitoring station
In a typical geophysical monitoring station atlas is used with a low noise force balance triaxial accelerometer and with a triaxial velocimeter both mounted on a concrete slab.
Both sensors are digitized with high dynamics, high accuracy ADC.
ATLAS can be equipped with auxiliary analog inputs in order to monitor enviromental data (temperature or humidity) or with digital input to monitor external events (vault open/closed) or even with output driving capability to comunicate exceeding thresholds (alarms).
Options
You can have ATLAS configured according your needs
2.4Ghz comunication radio module.
Thanks to the SoftAP function you can download data and configure your ATLAS directly from your device (mobile, tablet, notebook), moreover you can create a network of completly wireless Lunitek devices.
HSPA comunication radio module.
Insert a standard sim card inside you ATLAS and you can reach it remotely using a VPN.
ATLAS is available with standard input impendance (40KΩ) or with high input impendance option (1.8MΩ)
ATLAS is available with 3, 6 or 9 input channels. Inputs are located on military connectors.
You can have ATLAS with auxiliary low speed analog/digital inputs.
Thanks to this option you can integrate sensor data with external environmental information (temperature, humidity) or you can be notified when the containing vault is open. Relay output to control alarms comes as an option.
ATLAS is compatible with many third part sensors through the MCO option.
This option allows the instrument to fully interface with the sensors which needs for example the mass centering.
You can have your ATLAS with a professional protective case.
Models
ATLAS models available
- ATLAS 3T: 3 24bit channels on a single MIL connector (size 14, 19 pins) sample rate up to 1Khz.
- ATLAS 6T: 6 24bit channels on two MIL connectors (size 14, 19 pins) sample rate up to 500Hz.
- ATLAS 9T: 9 24bit channels on three MIL connectors (size 14, 19 pins) sample rate up to 250Hz.
- ATLAS 3S: 3 24bit channels on three MIL connectors (size 10, 7 pins) sample rate up to 1Khz.
- ATLAS 6S: 6 24bit channels on six MIL connectors (size 10, 7 pins) sample rate up to 500Hz.
Features
| Inputs | Differential |
| Channels | 3 low noise 24bit |
| Dynamic Range | >136dB@100Sps |
| Sampling Rate | 10,100,200,250,500,1000 Sps |
| Sampling Topology | Synchronous |
| Data Format | MiniSeed or Proprietary |
| Trigger | STA/LTA |
| Timing | Built-in GNSS receiver |
| Timestamp | Encapsulated in data |
| LAN | 10/100 ethernet port |
| WiFi | Optional built-in |
| Cellular Modem | Optional built-in |
| Power Supply | 9-28 Volt DC – power consumption < 2W |
| Back up Battery | Internal LiPo |
| System Autonomy w/o external supply | 33 hours |
| Configuration | Web Interface |
| Compatibility | Earthworm,Antelope,Geopsy,SeiscomP and SeisGram2K |
| Weight | 2Kg |
| IP protection | IP68 |
| Temperature Range | -40°C to +70°C |
Faqs
FREQUENTLY ASKED QUESTIONS
IS ATLAS CAPABLE OF PERFORMING BOTH REAL-TIME STREAMING AND EVENT-TRIGGERING SIMULTANEOUSLY?
Answer: Yes, ATLAS may do both tasks in parallel. For event-triggering, threshold exceedance instead of STA/LTA is recommended for accelerometers.
WHAT HAPPENS WHEN THE TELEMETRY IS DOWN? CAN THE DATA BE RETRIEVED EASILY?
Answer: The telemetry works through SeedLINK protocol, which holds data in its ring buffer whose size is by default 1GB (expandable): it corresponds to some days of continuous recording. When the telemetry goes down, the client may request data from the last packet received before the break and then recovered all the missing data. This is automatically handled by the SeedLINK client. Whether the telemetry is up or down, the device always stores data in a separate folder and the telemetry (SeedLINK) server detects it, and copies data in its ring buffer, ready to be sent on request.
CAN MULTIPLE ATLAS DIGITIZERS AT DIFFERENT LOCATIONS BE TRIGGERED SIMULTANEOUSLY?
Answer: This could be done in two ways. For example, if the 2 or more ATLAS digitizers are in the same LAN segment, either ATLAS could reach the trigger status and trigger all the other units with a broadcast message. If they are installed in different LAN segments (for example there is a gateway in the middle), this won’t work and we should install an additional module on a Linux machine that catches the alarms from the devices and implements a trigger voting algorithm.
WHAT FORMAT DOES THE ATLAS DIGITIZER USE TO SAVE EVENT FILES?
Answer: MiniSEED, just like the continuous recording. But if we install the QUAKELOGIC Event Watchdog software to the remote server, the trigger files may be sent automatically to a remote server and exported in ASCII format, or the server may extract the event data from the continuous recording and perform the export. For example, this would be the best way to interact with a LABVIEW application.
HOW DOES ATLAS DIGITIZER SEND AN EVENT FILE TO A REMOTE SERVER?
Answer: The ATLAS digitizer can communicate with the remote server (Linux Machine) through MQTT and SeedLINK. The Linux Machine takes care of storing all the continuous recordings from the ATLAS devices and receives the trigger data through MQTT or just extracts it from the continuous buffer. At this point, data is still available in MiniSEED. Once we have a time window for an event, we may export it in ASCII.
HOW CAN ATLAS DIGITIZER BE POWERED BY A SOLAR POWER?
Answer: The ATLAS digitizer can be powered by a 12 V solar panel (>100 W). The system requires a solar panel, 12V backup battery and controller unit. QuakeLogic can provide all these auxiliary hardware including on-site installation.
Datasheet
RECENT CLIENTS
